Eagle Cap Campers
1165 bump stops - Printable Version

+- Eagle Cap Campers (https://www.eaglecapowners.com/owners)
+-- Forum: Eagle Cap & Adventurer Campers (https://www.eaglecapowners.com/owners/forumdisplay.php?fid=3)
+--- Forum: Eagle Cap Campers (https://www.eaglecapowners.com/owners/forumdisplay.php?fid=37)
+---- Forum: 1165 Models (https://www.eaglecapowners.com/owners/forumdisplay.php?fid=9)
+---- Thread: 1165 bump stops (/showthread.php?tid=296)



1165 bump stops - Berge 1313 - 01-05-2018

Any one ever get smaller front bump stops to get 1165  further up in the bed there pretty long 2inchs is a lot?


RE: 1165 bump stops - Troy - 01-16-2018

I was just searching on the same thing.. I'd like to move mine forward an inch or so.


RE: 1165 bump stops - pullit - 02-03-2018

I removed the factory bump stops and installed some rubber bumpers.  This allow the camper to move foreword about 2". A definite improvement.  Any time I can move the center of gravity FWD 2" so easy is a must do to me.


RE: 1165 bump stops - BobV - 02-16-2018

(02-03-2018, 07:01 PM)pullit Wrote: I removed the factory bump stops and installed some rubber bumpers.  This allow the camper to move foreword about 2". A definite improvement.  Any time I can move the center of gravity FWD 2" so easy is a must do to me.

I did the same


RE: 1165 bump stops - jake - 04-30-2019

I cut about 1/4"-1/2" of material out of the flange that extends fwd. This allows the side to bend in more. and the cuts are at a 45 degree angle so it can get closer and over lap.  Works for us.